Embedded Systems News
1.2M views | +100 today
Follow
Embedded Systems News
Embedded Software programming, testing and life cycle. Development platforms and SDK/BSP. Linux and Android tips. Product news about news MCU, MPU, Chipset and retail products realted to embedded systems
Curated by cnxsoft
Your new post is loading...
Your new post is loading...
Scooped by cnxsoft
Scoop.it!

NetBurner SOMRT1061 - A stamp-sized dual Ethernet SoM powered by NXP's i.MX RT1061 crossover processor - CNX Software

NetBurner SOMRT1061 - A stamp-sized dual Ethernet SoM powered by NXP's i.MX RT1061 crossover processor - CNX Software | Embedded Systems News | Scoop.it
The NetBurner SOMRT1061 is an NXP i.MX RT1061 System-on-Module in an ultra-compact stamp-sized footprint (25.4 x 25.4mm) with dual Ethernet.
Amogelang's curator insight, May 21, 9:25 PM
Share your insight
Scooped by cnxsoft
Scoop.it!

Matter 1.3 specification adds support for water and energy management, electric vehicle chargers, and various household appliances - CNX Software

Matter 1.3 specification adds support for water and energy management, electric vehicle chargers, and various household appliances - CNX Software | Embedded Systems News | Scoop.it
The Connectivity Standard Alliance (CSA) has just announced the release of the Matter 1.3 specification and SDK with energy reporting, support for water...
No comment yet.
Scooped by cnxsoft
Scoop.it!

Radxa ROCK 5C (Lite) SBC features Rockchip RK3588S2 or RK3582 SoC, WiFi 6, Raspberry Pi PCIe FFC connector - CNX Software

Radxa ROCK 5C (Lite) SBC features Rockchip RK3588S2 or RK3582 SoC, WiFi 6, Raspberry Pi PCIe FFC connector - CNX Software | Embedded Systems News | Scoop.it
First came the ROCK 5B pico-ITX SBC, then the Raspberry Pi 4-sized ROCK 5A board, and now Radxa has launched the Radxa ROCK 5C and 5C Lite single board...
No comment yet.
Scooped by cnxsoft
Scoop.it!

MemryX MX3 edge AI accelerator delivers up to 5 TOPS, is offered in die, package, and M.2 and mPCIe modules - CNX Software

MemryX MX3 edge AI accelerator delivers up to 5 TOPS, is offered in die, package, and M.2 and mPCIe modules - CNX Software | Embedded Systems News | Scoop.it
Jean-Luc noted the MemryX MX3 edge AI accelerator module while covering the DeGirum ORCA M.2 and USB Edge AI accelerators last month, so today, we'll have...
No comment yet.
Scooped by cnxsoft
Scoop.it!

SONOFF Zigbee Bridge Ultra (ZBBridge-U) Zigbee 3.0 gateway and Matter Bridge supports up to 256 sub-devices - CNX Software

SONOFF Zigbee Bridge Ultra (ZBBridge-U) Zigbee 3.0 gateway and Matter Bridge supports up to 256 sub-devices - CNX Software | Embedded Systems News | Scoop.it
SONOFF Zigbee Bridge Ultra, also known as ZBBridge-U, is a Zigbee 3.0 gateway and Matter Bridge powered by a 1.5 GHz Rockchip RV1109 dual-core processor...
No comment yet.
Scooped by cnxsoft
Scoop.it!

HackBat - DIY open-source hardware Flipper Zero alternative features Raspberry Pi RP2040 MCU, ESP8266 WiFi module, RF transceiver... - CNX Software

HackBat - DIY open-source hardware Flipper Zero alternative features Raspberry Pi RP2040 MCU, ESP8266 WiFi module, RF transceiver... - CNX Software | Embedded Systems News | Scoop.it
HackBat is an open-source hardware pen-testing device designed for hackers and makers and equipped with a Raspberry Pi RP2040 microcontroller, an ESP8266...
No comment yet.
Scooped by cnxsoft
Scoop.it!

NXP i.MX 95 SMARC 2.1 system-on-modules - ADLINK LEC-IMX95 and iWave iW-RainboW-G61M - CNX Software

Several companies have unveiled SMARC 2.1 compliant system-on-modules powered by the NXP i.MX 95 AI SoC, and today we'll look at the ADLINK LEC-IMX95 and...
wilfredjudge103@gmail.com's comment, May 16, 8:12 PM
Losing my assets {crypto} to online scammers is one of the worst feeling i ever had.I was a victim to crypto online scams who made away with my $120,000 worth crypto (USDT) after investing with them in their platform.. Before the intervention of {ASSETS LAB} a recovery agency who helped me recoup back all the funds that was stolen from me ..
Three months ago i ran into a crypto investment platform called {GX TRADE} and they promise to assist me in crypto investment and mining and profits, after several weeks of following them on their platform where they teach their subscribers about crypto mining and investment and offering assistance to help their subscribers to make profits for them by persuading us to invest on their platform {Gx trade }..
2 months ago i decided to invest with them , i did all the necessary requirements and agreement was reached..One week later , i went to to check on them on their platform and discovered that i cant reach them anymore on any of their platform which turns out to be a scam after so many enquirement and confirmations .. i was devastated and nearly lost my life on the process.
But thanks to my friend who introduced me to {ASSETS LAB LTD} a crypto recovery agency who helped me recover every penny stolen from me by the crypto scammers after a month of submitting my case to them . They followed my case diligently and made sure they recovered my funds and brought back life and joy to me and my family again ..
Contact {ASSETS LAB LTD } for any of your recovery including crypto recovery and any of your lost assets .. You can save a life today.

FIRM : ASSETS LAB LTD
Email: info@lab-assets.tech
Website: https://lab-assets.tech/
Whatsapp: +17126004729
Scooped by cnxsoft
Scoop.it!

Blaustahl USB storage device features 8KB FRAM with up to 200 years of data retention - CNX Software

Blaustahl USB storage device features 8KB FRAM with up to 200 years of data retention - CNX Software | Embedded Systems News | Scoop.it
Machdyne's Blaustahl is a USB storage device equipped with a Raspberry Pi RP2040 MCU and 8KB of FRAM with a potential lifespan of over 200 years and...
No comment yet.
Scooped by cnxsoft
Scoop.it!

SparkFun M7E Hecto is a simultaneous RFID Reader with USB-C connectivity and a range of up to 5m - CNX Software

SparkFun M7E Hecto is a simultaneous RFID Reader with USB-C connectivity and a range of up to 5m - CNX Software | Embedded Systems News | Scoop.it
SparkFun has announced the M7E Hecto, a ‘simultaneous’ RFID reader in a compact form factor and high-performance capabilities.The RFID reader is powered...
No comment yet.
Scooped by cnxsoft
Scoop.it!

Radxa Zero 3E SBC offers gigabit Ethernet and PoE in Raspberry Pi Zero 2 W form factor - CNX Software

Radxa Zero 3E SBC offers gigabit Ethernet and PoE in Raspberry Pi Zero 2 W form factor - CNX Software | Embedded Systems News | Scoop.it
Last December, we wrote about the Rockchip RK3566-powered Radxa Zero 3W WiFi 6 SBC and noted that the Radxa Zero 3E with gigabit Ethernet and optional PoE...
No comment yet.
Scooped by cnxsoft
Scoop.it!

ardEEG shield works with Arduino UNO R4 WiFi for biosignals measurement - CNX Software

ardEEG shield works with Arduino UNO R4 WiFi for biosignals measurement - CNX Software | Embedded Systems News | Scoop.it
PiEEG has launched the ardEEG shield specially designed for the Arduino UNO R4 WiFi and capable of measuring biosignals such as those used in...
No comment yet.
Scooped by cnxsoft
Scoop.it!

ESP32-S3-Matrix board features 64 LEDs, GPIO pins, 9-axis "attitude" sensor for robotics and motion control applications - CNX Software

ESP32-S3-Matrix board features 64 LEDs, GPIO pins, 9-axis "attitude" sensor for robotics and motion control applications - CNX Software | Embedded Systems News | Scoop.it
The Waveshare ESP32-S3-Matrix is a microcontroller development board designed for AIoT applications, featuring a larger 8x8 RGB LED matrix (64 LEDs)...
No comment yet.
Scooped by cnxsoft
Scoop.it!

New NXP i.MX 93-based system-on-modules launched by MYiR, Variscite, and Compulab - CNX Software

New NXP i.MX 93-based system-on-modules launched by MYiR, Variscite, and Compulab - CNX Software | Embedded Systems News | Scoop.it
We have covered announcements about early NXP i.MX 93-based system-on-modules such as the ADLINK OSM-IMX93 and Ka-Ro Electronics' QS93, as well as...
No comment yet.
Scooped by cnxsoft
Scoop.it!

FLIP_C3 ESP32-C3 board takes up to 60V DC input, ships with ESPHome firmware - CNX Software

Voidbox FLIP_C3 is an open-source hardware board powered by an ESP32-C3 WiFi & BLE microcontroller that takes up to 60V DC power input feeding a 5V/2A...
No comment yet.
Scooped by cnxsoft
Scoop.it!

AAEON RICO-3568 is a Pico-ITX Plus board powered by a Rockchip RK3568 SoC - CNX Software

AAEON RICO-3568 is a Pico-ITX Plus board powered by a Rockchip RK3568 SoC - CNX Software | Embedded Systems News | Scoop.it
AAEON RICO-3568 is a Pico-ITX Plus single board computer powered by a Rockchip RK3568 quad-core Cortex-A55 AI SoC, up to 8GB LPDDR4, 16GB eMMC flash, four...
No comment yet.
Scooped by cnxsoft
Scoop.it!

ESP32-S3 1.69-inch touch display features 6-axis IMU, RTC, UART, and more - CNX Software

ESP32-S3 1.69-inch touch display features 6-axis IMU, RTC, UART, and more - CNX Software | Embedded Systems News | Scoop.it
The Waveshare ESP32-S3 1.69-inch touch display is a development board that uses an ESP32-S3 as the main controller.The board features a 240×280...
No comment yet.
Scooped by cnxsoft
Scoop.it!

Easily build a robot car with the Car Base Board for the STM32F411 "Black Pill" board - CNX Software

Easily build a robot car with the Car Base Board for the STM32F411 "Black Pill" board - CNX Software | Embedded Systems News | Scoop.it
The Car Base Board from Applying Microcontroller Solutions is a modular platform for building robot car projects powered by the WeAct Studio Black Pill...
ramaphokohappy@gmail.com's curator insight, May 22, 2:25 AM
another good source to look out for
Scooped by cnxsoft
Scoop.it!

/e/OS v2 privacy-focused, Google-free Android mobile OS released with improved UI, Android Auto support, etc.. - CNX Software

/e/OS v2 privacy-focused, Google-free Android mobile OS released with improved UI, Android Auto support, etc.. - CNX Software | Embedded Systems News | Scoop.it
The e Foundation has just announced the release of the /e/OS v2 Android-based Google-free open-source mobile operating system with an improved launcher,...
No comment yet.
Scooped by cnxsoft
Scoop.it!

GEEKOM A8 (AMD Ryzen 9 8945HS) AI mini PC review - Part 1: Specs, unboxing, teardown, and first boot - CNX Software

GEEKOM A8 (AMD Ryzen 9 8945HS) AI mini PC review - Part 1: Specs, unboxing, teardown, and first boot - CNX Software | Embedded Systems News | Scoop.it
GEEKOM A8 is an AI mini PC based on the powerful AMD Ryzen 9 8945HS (or Ryzen 7 8845HS) AI processor with AMD Radeon 780M Graphics, up to 64GB DDR5...
No comment yet.
Scooped by cnxsoft
Scoop.it!

52Pi W01 U2500 HAT adds 2.5GbE and NVMe SSD support to Raspberry Pi 5 SBC - CNX Software

52Pi W01 U2500 HAT adds 2.5GbE and NVMe SSD support to Raspberry Pi 5 SBC - CNX Software | Embedded Systems News | Scoop.it
52Pi W01 U2500 HAT expansion board adds USB 2.5GbE (2.5Gbps Ethernet) and NVMe SSD support to Raspberry Pi 5 SBC.
Scooped by cnxsoft
Scoop.it!

Rockchip RK2118G/RK2118M dual-core Star-SE Armv8-M microcontrollers target smart audio applications - CNX Software

Rockchip RK2118G/RK2118M dual-core Star-SE Armv8-M microcontrollers target smart audio applications - CNX Software | Embedded Systems News | Scoop.it
Rockchip RK2118G and RK2118M smart audio microcontrollers based on a dual-core Star-SE Armv8-M processor, an NPU for smart AI audio processor, three DSPs,...
wilfredjudge103@gmail.com's comment, May 16, 8:15 PM
Losing my assets {crypto} to online scammers is one of the worst feeling i ever had.I was a victim to crypto online scams who made away with my $120,000 worth crypto (USDT) after investing with them in their platform.. Before the intervention of {ASSETS LAB} a recovery agency who helped me recoup back all the funds that was stolen from me ..
Three months ago i ran into a crypto investment platform called {GX TRADE} and they promise to assist me in crypto investment and mining and profits, after several weeks of following them on their platform where they teach their subscribers about crypto mining and investment and offering assistance to help their subscribers to make profits for them by persuading us to invest on their platform {Gx trade }..
2 months ago i decided to invest with them , i did all the necessary requirements and agreement was reached..One week later , i went to to check on them on their platform and discovered that i cant reach them anymore on any of their platform which turns out to be a scam after so many enquirement and confirmations .. i was devastated and nearly lost my life on the process.
But thanks to my friend who introduced me to {ASSETS LAB LTD} a crypto recovery agency who helped me recover every penny stolen from me by the crypto scammers after a month of submitting my case to them . They followed my case diligently and made sure they recovered my funds and brought back life and joy to me and my family again ..
Contact {ASSETS LAB LTD } for any of your recovery including crypto recovery and any of your lost assets .. You can save a life today.

FIRM : ASSETS LAB LTD
Email: info@lab-assets.tech
Website: https://lab-assets.tech/
Whatsapp: +17126004729
Scooped by cnxsoft
Scoop.it!

Official Raspberry Pi M.2 HAT+ launched for $12 - CNX Software

Official Raspberry Pi M.2 HAT+ launched for $12 - CNX Software | Embedded Systems News | Scoop.it
The official Raspberry Pi M.2 HAT+ is finally out for $12.The add-on board allows users to connect M.2 M-key peripherals, mainly NVMe SSDs, but also AI...
No comment yet.
Scooped by cnxsoft
Scoop.it!

Arduino Alvik is a 3-wheel robot designed for STEAM education - CNX Software

Arduino Alvik is a 3-wheel robot designed for STEAM education - CNX Software | Embedded Systems News | Scoop.it
Arduino Education's Arduino Alvik is a 3-wheel educational robot that was initially unveiled at the Bett 2024 show in London and designed to teach...
No comment yet.
Scooped by cnxsoft
Scoop.it!

Linux 6.9 release - Main changes, Arm, RISC-V, and MIPS architectures - CNX Software

Linux 6.9 release - Main changes, Arm, RISC-V, and MIPS architectures - CNX Software | Embedded Systems News | Scoop.it
Linus Torvalds has just announced the release of Linux 6.9 on LKML: So Thorsten is still reporting a few regression fixes that haven't made it to me yet,...
Scooped by cnxsoft
Scoop.it!

Waveshare Thermal Imaging Camera Module - Raspberry Pi HAT or USB-C model, 80x62 resolution, dual FOV options (45°/90°) - CNX Software

Waveshare Thermal Imaging Camera Module - Raspberry Pi HAT or USB-C model, 80x62 resolution, dual FOV options (45°/90°) - CNX Software | Embedded Systems News | Scoop.it
The Waveshare Thermal Imaging Camera module comes in two variants, namely the Thermal-45/90 Camera Raspberry Pi HAT and Thermal-45/90 USB Camera.The main...
No comment yet.